Fiber Drawing Machine – Just Posted..

Fiber proof testers are designed to apply a set load to Fiber Coloring Machine in order to check the effectiveness of the spliced Fiber. Our Fiber proof testers can be found in both linear and rotary styles, for both proof and stress testing. Fiber proof testers are available for single mode, multimode, and polarization-sustaining fibers. Pick from dedicated, standalone techniques or multi-purpose designs which can be also competent at stripping, cleaning, cleaving, splicing, and/or recoating.

Fiber Recoaters with Proof Testers provide easy, integrated solutions to recoat and check combination-spliced fibers. The Fiber recoating process restores the barrier covering to some stripped Fiber, providing more versatility when compared to a heat-reduce safety sleeve, enabling so that it is dealt with and coiled with no damage to the fusion-spliced section. The integrated linear or rotary Proof tester enables users to immediately test a recoated Fiber having a pre-decided load and figure out the long-phrase longevity of the Fiber. Due to their capacity to restore a combination-spliced Fiber to near initial problem, these systems are best for programs including undersea optical Fiber cables, submarine interaction cabling, Fiber lasers, or Distributed Bragg Reflector (DBR) lasers.

The procedure starts with the fusion-spliced part of Fiber being placed in the middle of the mold assembly (see image towards the right). As soon as set in place, inserts in the Fiber obstructs secure the spliced Fiber in place. Recoat materials is motivated to the cavity and then UV-treated. The recoated Fiber can then be tested by pulling on it up to a pre-determined weight.

Recoater and Mold Set up Choices – Recoaters can be purchased with either an automated or handbook mold assembly. The automatic mold assembly features pneumatic control over the mold dishes and is also optimized for top-volume manufacturing applications. Manual mold assemblies, on the other hand, use easy-to-open mold plates which provide more flexibility and are ideal for reduced-volume production or R&D programs. A computerized or handbook volumetric dispensing pump and injection product is used to inject the recoat material into the mold cavity.

The Optical Fiber Coloring Machine comes standard having a mold assembly for Ø430 µm covered fibers; For your handbook recoaters (Item #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly comes separately to ensure that customers can pick the right mold covering size for program. Custom mold coating dimensions are available up to Ø900 µm. Pre-installing of the mold set up in the factory can also be readily available. Contact Technology Assistance for additional info on custom molds or factory set up.

We provide you with both higher-index (Item # AB950200) and low-directory (Product # PC373) recoat components for use during these recoaters. Recoaters with manual shot pumping systems (Product #s PTR206B and PTR307B) are appropriate for both varieties of recoat material; other recoaters are appropriate for the top-index material only. Our manual recoaters having an automated shot system (Item #s PTR206 and PTR307) can be personalized to work with both the low- and high-index recoat materials; please contact Tech Support to learn more.

Proof Tester Choices – The PTR206, PTR206B, and PTR208 Fiber Recoaters come with an integrated linear Proof tester, that takes the Fiber up to a predetermined load (20 N) then releases it. The linear Proof tester uses the identical Fiber keeping blocks as the recoater and thus the Fiber does not have to be relocated just before testing. The PTR307 and PTR307B Fiber Recoaters come with a built-in rotary Proof tester, which can perform both Proof and stress assessments (?89 N). A single set of Proof test grips is provided; replacement Proof test grips can be found below in packs of 10. Every screening process is fully automated through the provided handset or tablet pc controller, enabling qyjflh consumer to select guidelines such as the load, the pace at which the load is applied, as well as the hold time.

Inserts for Fiber Holding Obstructs – Along with the above, we provide you with many different inserts for use in the Fiber holding blocks from the recoaters in order to support a wide range of Optical Fiber Ribbon Machine covering diameters. For recoaters with a rotary Proof tester, the inserts are suitable for Fiber coating diameters in a range from 125 µm to 900 µm. For recoaters using a linear Proof tester, the inserts cover a range for Fiber films from Ø250 µm to Ø900 µm.

Leave a Reply

Your email address will not be published. Required fields are marked *